Coldmix Instant Pothole Repairing Solution

Coldmix Instant Pothole Repairing Solution

COLD-MIX Asphalt is a superior material, uses a high performance polymer formulated compound is .a durable and long lasting cold lay bitumen macadam developed specifically for the repair of Potholes, edge deformation, utility cuts, overlays, edge repairs and small carpeting jobs in macadam (asphalt) or other paved areas e.g. car parks, walkways, cycle paths etc. It can be laid in all weather conditions and can be driven over immediately after application.

Features and Benefits
• COLD-MIX is the idea sl olution for Instant pothole repairs.
• Strongest and most durable
• Ready to use. Can be carried to site in easy to handle in Bags.
• Excellent workability
• Bonds well to cool, damp surfaces
• Ready for heavy traffic immediately after laying.
• Can be laid in all weather conditions.
• Safe for you & Environment

Technical Data (Typical):

Chemical Type : A mixture of aggregate and polymeric emulsion
Aggregate : Limestone
Binder : Bitumen
Aggregate Size : Fine, 6mm and 10 mm
Coverage : 0.75 sq.m per 25kg (10mm thickness)
Shelf Life : 6months
Cure Times : Cure time will vary with temperature and amount of use

How to Use?

Potholes repair with COLD-MIX
It is so simple anyone can do it.
• Mark the affected area and clean hole of loose debris.
• The edges of the damaged area should be cut properly into square.
• Remove the water from the affected area and make the surface as dry as possible.

Technical Data (Typical):

Chemical Type : A mixture of aggregate and polymeric emulsion
Aggregate : Limestone
Binder : Bitumen
Aggregate Size : Fine, 6mm and 10 mm
Coverage : 0.75 sq.m per 25kg (10mm thickness)
Shelf Life : 6months
Cure Times : Cure time will vary with temperature and amount of use

How to Use?

Potholes repair with COLD-MIX
It is so simple anyone can do it.
• Mark the affected area and clean hole of loose debris.
• The edges of the damaged area should be cut properly into square.
• Remove the water from the affected area and make the surface as dry as possible.

Apply tack coat with emulsion for better bonding.

  • Pour out theCOLD-MIX compound slightly higher level than the road surface.
  •  Compact the pothole with tamper, roller or hand rammer.
  •  Allow traffic preferably after 10 to 15 min.,
  •  After covering up the top surface with stone dust allow traffic immediately over the repaired area.
  • Pothole
  • Remove loose material and Arey stagnant water
  • Empty the COLD MIX bag in the pathole and compact it
  •  Ready for motoring
  •  Applying special grade of Emulsion.

Storage

• Available in 25 kg bag.
• COLD -MIXbags are keep in dry place and away from direct sunlight.
• Consume all the material if once the bag is opened.

Request a call back

Got a query?

Book A Consultation

Fill out the form below, and we will be in touch shortly.